Test & Tag Specifications, Advantage, and Service Provider

Cheska Mullen | August 14, 2018 | 0 | Other

The current legislation and Australian standards specify that employers must test all electrical equipment of the plug-in type in the workplace. It also requires that test & tag services carried out must be documented and maintained.

test & tag

But what electrical appliances need to be tested?

Before you hire test & tag Australia service providers, familiarise the test and tag guidelines.

Visual Inspection

Equipment in low-risk or non-hostile environment only requires visual inspection before they are tagged. These include:

  • Fixed electrical equipment
  • Stationary equipment with no carry handles and with a mass exceeding 18kg.
  • Computer workstations

Inspection and Testing

Electrical appliances and equipment in a high-risk or hostile environment need to be inspected and tested. Data acquired must be kept and maintained.

  • Commercial or handheld kitchen appliance, kettles, and toasters
  • Power tools, power boards, heaters, fans extension leads, electric saws, vacuum cleaners.

Test & Tag Intervals – Australian Standard AS3760

Test & tag in Australia is not a one-time thing but a process done periodically or for a specific schedule. The “when” will depend on the work environment, the equipment to be tested and tagged, and the type of residual current devices (RCDs).

For equipment, including class 1 and class 2, EPODs, cord sets, cord extension sets in the following environments, the interval between inspection and test is as follows:

Prior to hire

  • Equipment hired must be inspected before use.

3 months

  • Hire equipment used for test and tag

6 months

  • Factories, workshops, manufacturing, assembly, maintenance or fabrication, and places of work or repair
  • Equipment used for commercial cleaning

12 months

  • Environment with the equipment or supply flexible cord is subjected to the following:
    • Open to abuse
    • Used in a hostile environment
    • Flexing in normal use

5 years

  • Environment where the equipment or supply cord is NOT subjected to the following:
    • Open to abuse
    • Used in a hostile environment
    • Flexing in normal use

Equipment found in residential areas of hotels, motels, boarding houses, halls, hostels, residential institutions, accommodation houses, and the like are subject to testing.

The same standards also require tests to be done on portable or fixed RCDs through a push button test carried out by a user and a combination of push button test & operating time testing.

Factory RCDs, for example, must be tested based on the following schedules:

Push-Button Test by User

Portable – Daily or before every use (whichever is longer)

Fixed – 6 months

Operating Time & Push Button Test

Portable – 12 months

Fixed – 12 months

Advantages of Test & Tag

It may seem such a hassle to repeatedly test electronic equipment and electrical systems, but it is the most effective way to ensure workplace safety. Tools and equipment tested regularly will work at peak performance and protect users and workers from electrocution, overheating, and similar problems.

With a test and tag service, you and your employees will have peace of mind knowing that the tools you use are checked by professionals in a careful and detail-orientated manner. This translates to safety day in and day out.

Find Test & Tag Australia

For premium test and tag service in Australia, hire Victoria Test and Tag to carry out the work. It is a specialised company in work health and safety at the workplace that services Adelaide, Brisbane, Hobart, Melbourne, and Sydney.

Hire experienced and qualified technicians for the job. Contact Victoria Test and Tag today.

Related Posts

Recent Posts